Liquid Filling

1,2, & 4 oz. Hot fill-cold fill energy shots with sleeve label (any bottle)
8 oz. Hot fill with sleeve label, 12 or 24 pack
10 oz. Hot fill with cut and stack or sleeve label, 12 or 24 pack
12 oz. Hot fill with cut and stack or sleeve label, 12 or 24 pack
16 oz. Hot fill stock 38mm, cut and stack or sleeve label, 12 or 24 pack
16 oz. Power Flex long-neck 38mm, cut and stack or sleeve label, 12 or 24 pack
16.9 oz. Power Flex dome 38mm, cut and stack or sleeve label, 12 or 24 pack
20 oz. Stock 38mm or 43mm, cut and stack or sleeve label, 12 or 24 pack
32 oz. Stock 38mm or 43mm, cut and stack or sleeve label, 6, 8, or 12 pack. Amcor, Ball, Constar, or Graham
46 oz. Proprietary bottle with sleeve label.
64 oz. round cut and stack.
64 oz. Rectangular currently being worked on.
55 gl Blends

Glass

10 oz. Hot fill cut and stack, sleeve label, pressure sensitive. 12 or 24 pack
14 oz. Hot fill cut and stack, sleeve label, pressure sensitive. 12 or 24 pack

Cold Fill non-carbonated

We can fill from 2 oz, 4 oz, 6 oz, 8 oz, 10 oz, 12 oz, 16 oz, 20 oz, and 24 oz bottles
12 or 24 pack, cut and stack.
water and blended products

Other CAPABILITIES

Bulk 55 gallon Drums formulation and fill
Repacking into variaty packs of 4, 6, 8, or 12 packs
Variety packing with registered film

HOT FILL

Hot Fill is a bottle filling process in which the contents of the plastic bottle to be packaged are heated – up to 194 degrees F (90 degrees C) – in order to sterilize the product prior to being poured into the bottle. Products packaged using Hot fill is usually restricted to high-acid products with a PH less than 4.5.